Zpc 35601BN06 Manuel d'utilisateur

Pg 1 of 10Installation Instructions - 35601BN06 Curved Rod (Brushed Nickel)Instrucciones de Instalación - 35601BN06 Tubo Curvo (Níquel Cepillado)Instr

Pg 10 of 10Fasten the 7/8” diameter tube (B) to the 7/8”end cap (D) using end cap screws (H) andthreaded inserts (I). Asegure el tubo con diámetro de

Pg 2 of 10Tools Needed:Herramientas Necesarias:Outils nécessaires :Parts List:Lista de Partes:Liste des pièces :(D) 7/8” End CapCubierta terminal de 7

Pg 3 of 10(G) 1 Plastic Ring1 Anillo de plástico1 Bague en plastique(L) 4 Mounting Screws4 Tornillos para montaje4 vis de montage(M) 4 Drywall Anchors

Mounting Instructions Instrucciones de Montaje Instructions de MontageThe locations for mounting plates (C,D) willvary depending on the width of the t

Pg 5 of 10Measure up 65” above the front of the tubledge. For 60” tub openings:Using a level, make a mark 5” in (toward thetub). For 72” tub openings:

Pg 6 of 10Drill the 2 marked spots for each end cap.Insert drywall anchors (M) in the holes(unless screw will go directly into a stud).Taladre los 2 p

Pg 7 of 10Fasten the 7/8” endcap (D) to the wall, using2 mounting screws (L). NOTE: Be sure to mount the end cap to thewall with the open side facing

Pg 8 of 10Insert 1” tube plug (E) into 1” diameter tube (A)as shown. NOTE: Be sure to line up the cut-outsin the tube plug with the holes in the tube

Pg 9 of 10Insert plastic ring (G) into the end of the 1”diameter tube (A), as shown. Insert the endof the 7/8” tube (B) into the end of the 1”diameter